Sunday, January 14, 2018

Components

©2018 Barry Smith - Hammered section of a well worn silver-plated copper tulip vases
Fiona and I are doing quite a bit of work on our block and house at the moment - so time in the studio can be in bits and pieces.

I grabbed a couple bits of time over the weekend to make components for my flower assemblage sculpture including:

  • hammering the cone shaped sections of the flowers to be; 
  • making the circular pieces that will fit inside the opening section of the vases; and 
  • assembling the 25 stamen.


The cut down tulip vases can look pretty bad at the start - the beauty is under the grime.

©2018 Barry Smith - Silver-plated copper and brass narrow tulip vases with bases cut off
The hammering of the cone sections is done in a very systematic way using two different sized metal forming stakes. And after polishing the hammer marks become a uniting feature of the five flowers.

©2018 Barry Smith - Back from the polishing bench
©2018 Barry Smith - Five hammered and polished sections for the flowers
Again the metal for the sections that will be inside the trumpets are not really much to write home about. After pressing into their shallow bowl shape and given a first clean one can see the potential.

©2018 Barry Smith
©2018 Barry Smith - Pieces are cut and formed to sit inside the top of the trumpet section of the tulip vase.
The stamen are made from 1mm plastic covered stainless steel wire and 6-7mm glass beads - mainly purples and smokey grey-black.

©2018 Barry Smith - Like mini flowers?
©2018 Barry Smith
Other components to be made before assembling include: brass tubes to hols stamen, long copper tube stems and slightly larger copper sleeves to hold the stems and be glued into the base of the trumpets. These pieces will be made in the next week I hope.


3 comments:

  1. These are phenomenal transformations ... for the second time this morning I am reminded of my days at Colonial Williamsburg, where crafts(wo)men wrought replicas of 18th century silver. As fine as their work was (and is), I very much value the originality you bring to repurposing traditional forms. Truly magical to my eyes!

    ReplyDelete
  2. I have just been having a quick prowl back through some of your recent post Barry. A favourite would be your mock up for the flower stem in a vase. Stunning.

    ReplyDelete
  3. Diamonds in the rough. The hammered effect transformational!

    ReplyDelete

Comments are welcomed - it is good to connect with fellow travellers.